Toshiba 40L3400U User Manual Download Page 111

Page: 111 / 143

111

Using the TV’s Advanced Features

Setting up the Network

Even if an AP for IEEE 802.11n is used when Encryption is set to WEP or

TKIP, the Speed value might be low. We recommend that the Encryption

setting is changed to AES (Under manual setup).

When manually setting the IP Address, set Auto Setup to Off.

Advanced Network Setup

IP Address Setup

The settings in Auto Setup are linked to those selected in the DNS Setup

menu. If Auto Setup is set to On, then Auto Setup in the DNS Setup menu

will also be set to On.

Auto Setup:

Press the

MENU

button.

Select

Network

Network Setup

Advanced Network

Setup

and press the

button.

Press the ▲

▼ (arrow) buttons to select

IP Address Setup

and

then press the

button.

Press the ▲

▼ (arrow) buttons to select

Auto Setup

and press

the

button.

Press the ▲

▼ (arrow) button to select

Other items are grayed out when Auto Setup is set to On.

Manual Setup:

Press the

MENU

button.

Select

Network

Network Setup

Advanced Network

Setup

and press the

button.

Press the ▲

▼ (arrow) buttons to select

IP Address Setup

and

then press the

button.

Press the ▲

▼ (arrow) buttons to select

Auto Setup

and press

the

button.

Press the ▲

▼ (arrow) button to select

Off

Press the ▲

▼ (arrow) button to select

IP Address

Summary of Contents for 40L3400U
















































































































































Search results

Summary of Contents for 40L3400U

Reviews:

Related manuals for 40L3400U

Brands by name

Popular brands

Toshiba 40L3400U, User Manual

Search results

Summary of Contents for 40L3400U

Reviews:

Related manuals for 40L3400U

Brands by name

Popular brands