Toshiba 39L22U Page 119 User Manual Download

Page: 119 / 131

119

Troubleshooting

HDMI

problems

HDMI

problems

HDMI

cables.

Ensure that HDMI

cables with the (

) logo are used. For

more information, see

Legacy HDMI

sources.

Some legacy HDMI

sources may not work properly with the latest

HDMI

TV products due to new standard adoption.

Media Player problems

Incorrect functionality may occur when using a USB HUB
connection.

Photo files that were processed and edited using the computer’s
application software may not be viewable.

The TV may select one format automatically and play it when
contents that support two or more formats are played.

Confirm that the contents of the USB storage device are in formats
that are supported by this TV. For more information, see

“Using the

Media Player” on page 95

If the problem persists after trying the solutions

Contact Toshiba at:

Toshiba’s Support Web site:

support.toshiba.com

For technical support, call the Toshiba Customer Support Center:

Within the United States, at 800-631-3811

Outside the United States, at 949-583-3050

Summary of Contents for 39L22U




































































































































Search results

Summary of Contents for 39L22U

Reviews:

Related manuals for 39L22U

Brands by name

Popular brands

Toshiba 39L22U, User Manual

Search results

Summary of Contents for 39L22U

Reviews:

Related manuals for 39L22U

Brands by name

Popular brands