13
32" 720p 60Hz LED TV
www.tv.toshiba.com
AV (good)
1
Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2
Connect a coaxial cable (not provided) to the cable wall jack and to the cable-in jack on the cable or satellite box.
3
Connect an AV cable (not provided) to the AV jacks on your TV and to the AV out jacks on the cable or satellite box.
4
Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5
Press
INPUT
to open the
Input Selection
list, select
AV
, then press
ENTER
.
Coaxial (good)
1
Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.
2
Connect the coaxial cable to the cable wall jack and to the cable-in jack on the cable or satellite box.
3
Connect a coaxial cable (not provided) to the antenna/cable jack on your TV and to the coaxial out jack on the cable
or satellite box.
4
Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5
Press
INPUT
to open the
Input Selection
list, select
ANT / CABLE
, then press
ENTER
.
6
If you cannot tune to channels you know exist, scan for channels. See the
Auto Channel Search
option in
Automatically scanning for channels
on page
.
Note
Cables are often color-coded to match color-coded jacks.
Important
When you connect the audio using the AV jacks, the audio output is analog.
Video and audio jacks
AV cable
Cable or satellite box
Cable wall jack
Coaxial
cable
Cable or satellite box
Coaxial cable
Cable wall jack
Antenna/cable jack
Coaxial
cable
