Toshiba 2800-S201 User Manual Download Page 71

Page: 71 / 293

Part I: Getting to Know Your Computer

Learning the Basics

Playing a CD or DVD

Use the eject button to release the disc tray. This button
requires power to operate.

CAUTION: Never press the eject button or turn off the
computer while the activity light is glowing. Doing so could
damage the disc or the drive.

The manual eject button allows you to manually open the
disc tray when power to the computer and the drive is off.

To open the disc tray manually, insert a straightened paper
clip or other narrow object through the manual eject button’s
access hole.

The vent, located at the lower right-hand side of the drive,
cools the DVD-ROM drive’s internal mechanisms. Do not
block this vent.

HINT: When the computer is off and the DVD-ROM drive is
on, press the stop/eject control button on the top of the
computer to eject a disc.

Summary of Contents for 2800-S201






































































































































































































































































































Search results

Summary of Contents for 2800-S201

Reviews:

Related manuals for 2800-S201

Brands by name

Popular brands

Toshiba 2800-S201, User Manual

Search results

Summary of Contents for 2800-S201

Reviews:

Related manuals for 2800-S201

Brands by name

Popular brands