Part I: Getting to Know Your Computer
Getting Started
Setting up your computer
37
4
Using the small Phillips screwdriver, unscrew the two
screws that secure the memory slot cover, then remove
the memory slot cover.
Removing the memory slot cover screws
5
Put the screws and the cover in a safe place so that you
can retrieve them later.
CAUTION: Static electricity can damage the memory module.
Before you handle the module, touch a grounded metal
surface to discharge any static electricity you may have built
up.
To avoid damaging the memory module, be careful not to
touch its gold connector bar (on the side you insert into the
computer).
6
Remove the memory module from its antistatic
packaging.
7
Holding the memory module by its edges so that the
gold connector bar faces the slot, fit the module into the
socket.
Summary of Contents for 2800-S201
