Part II: Technical Reference
If Something Goes Wrong
Fixing device-related problems
236
The modem is on, set up properly and still will not
transmit or receive data.
Make sure the line has a dial tone. Connect a telephone
handset to the line to check this.
The other system may be busy or off line. Try making a test
transmission to someone else.
Rebooting your computer from a USB diskette drive
How do I reboot using a system diskette inserted in
an external diskette drive connected to a USB port?
To boot your computer from an external USB diskette drive
you must enable the USB-FDD Legacy Emulation option.
TECHNICAL NOTE: The default setting for USB-FDD Legacy
Emulation is Disabled.
Enabling the USB-FDD Legacy Emulation option
1
Click Start.
2
Double-click My Computer then Control Panel.
3
Select the USB tab and click Enabled.
4
Click OK.
If your operating system won’t start
If you need access to the diskette drive but cannot start
Windows, access System Setup:
1
Close all programs, shut down your computer and turn it
off.
Summary of Contents for 2800-S201
