manualshive.com logo in svg

Toshiba 2430-S255, User Manual, Page: 94 / 248

Share
Download
Toshiba 2430-S255 User Manual Download Page 94

94

Learning the Basics

Using Stand by

5.375 x 8.375 ver 2.3

Starting again from Hibernation mode

To start the computer from Hibernation mode, press and 
release the power button. The computer returns to the screen 
you were using.

If you put the computer in Hibernation mode by closing the 
display panel, you can start it again by opening the display 
panel.

NOTE: If your computer is running on batteries, you cannot start it 
again by opening the display panel. To turn the system back on, 
press the Power button.

Using Stand by 

Follow these steps to power down the computer using the 
Stand by:

1

Click 

Start

, select 

Turn off computer.

The Turn off computer box appears.

2

Click 

Stand By.

 

Sample Turn off computer dialog box 

The computer saves the status of all open programs and files 
to memory, turns off the display, and goes into a low-power 
mode. The on/off light blinks to indicate the machine is in 
Stand by mode.

Summary of Contents for 2430-S255

























































































































































































































































Reviews:

No comments