128
Enhancing Productivity
Using Hibernation
5.375 x 8.375 ver 2.3.2
7
In the Set to range dialog box, do one of the following:
❖
Click
DC only
for the settings to apply only when you
are using battery power.
❖
Click
All
for the settings to apply whether you are using
battery power or outlet power.
8
Click
OK
.
9
Click
OK
again, then close the Control Panel.
NOTE: For more information about the Power Saver utility, see
your user’s guide.
Starting again after Shut down
To start the computer up again, press the power button until
the on/off light changes to green.
If you shut down the computer by closing the display panel,
you can start it again by opening the display panel.
Using Hibernation
Enabling the Hibernation command
To use Hibernation, you must first enable the Hibernate
option in the Toshiba Power Saver utility.
To access Power Saver Hibernate Properties:
1
Open the
Start
menu, point to
Settings
, then click
Control
Panel
.
2
In the Control Panel window, double-click the
Toshiba
Power Saver
icon.
Summary of Contents for 2010
Page 186: ...186 5 375 x 8 375 ver 2 3 2 Blank Page ...
Page 212: ...212 5 375 x 8 375 ver 2 3 2 ...