Toshiba 2010, User Manual

Page: 123 / 212

123
Enhancing Productivity
Powering down the computer
5.375 x 8.375 ver 2.3.2
❖
Standby, which saves the current operating mode to memory
and enters a low power mode
Each option has its advantages.
TECHNICAL NOTE: Before using any of these options to power
down your computer, save your files and make sure the disk
activity lights are off.
If you change your mind and decide to continue working after all,
wait a few seconds before turning the computer on again.
Shut down command
The Shut down command powers off the computer. When
you start up again, the computer runs a self-test and loads the
operating system. You must open any programs and files you
want to use.
Factors to consider when choosing Shut down:
❖
No power is used while the computer is shut down. This is the
most efficient mode if you will be away from your computer
for an extended time.
❖
Restarting from Shut down uses the most time and battery
power.
❖
When starting up again, the system does not automatically
open the programs and files you were previously using.
Hibernation command
The Hibernation command powers off the computer, but it
first saves the current mode of the computer to the hard disk.
Since Hibernation does not require power to maintain the
saved information, the system settings are retained
indefinitely. Restoring information from the hard disk takes
longer than restoring it from memory. When you start up