Torus Power WM 40 BAL AVR-2 ELITE, Owner'S Manual

Page: 13 / 38

10 | P a g e
Side Panel Connections
Ethernet
Allows access to the AVR ELITE and internal software via a local web browser interface (See AVR ELITE software
section for more details) or Torus Power Connect service (see Torus Power Connect section).
USB 2.0 Port
For charging and external control (future)
12VDC Trigger On/Off
The AVR ELITE can be turned on and off by a 12 volt trigger input. Applying 12 volts turns ON the AVR
ELITE and removing the 12 volts turns it OFF. Requires a 3.5 mm TS type male audio connector with tip
wired as positive and sleeve wired as negative from controlling source.
12VDC Fault Output
The AVR ELITE provides a 12 volt fault output through a jack on the back panel. The output goes to 12
volts when a relay or voltage fault is detected. The maximum current that can be drawn from this
output is 75mA. Requires a 3.5 mm TS type male audio connector with tip wired as +ve and sleeve wired
as -ve.
Antenna
Connect the provided antenna for WiFi functionality if using the Torus Power Connect service.