Please keep the original shipping box and all packing material.
This will ensure the PB is protected in future transport.
In the unlikely event you have a problem and must return it for
service you must use the original packing material.
Ship the PBs only in the original packing material, as the unit is
not insurable by carriers otherwise.
Shipping Carton & Packing Material
Torus Power PowerBlock models are extremely efficient
devices, however, they are also high-power devices, and
must be adequately cooled. Floor mounting is permitted.
PowerBlock units have ventilation slots in each end-panel.
Maintain at least 5cm (2 inch) distance from each of these
surfaces to anything else. Should your installation
conditions be constricted, additional forced air-cooling may
be necessary.
Do not install the PowerBlock unit directly above heat-
generating equipment.
Maintain at least 15cm from the receptacle side of
PowerBlock for adequate wiring space.
Placement & Ventilation
Warranty
Description
Torus PowerBlock
,
,
and
are
PB 2 CE PB 4 CE PB 5
PB 10
ultra compact and portable toroidal isolation power
conditioners, and the most affordable products in the Torus
line-up. The compact footprint and rugged construction of
PowerBlock models make them convenient for use in almost
any situation. They look sharp on or near a component shelf,
on any floor surface or can be located elsewhere when space
is at a premium. Contact Torus Power for special mounting
requirements.
The European
is rated at 2.2A and is the ideal
PB 2 CE
accessory to provide true toroidal power conditioning for
compact power AV systems, or dedicated to video
components (ie. flat panel TVs, projectors); or audio
components (i.e. media sources, powered speakers, source
components, etc.).
The European
is rated at 4.4A and can be used in
PB 4 CE
systems up to its rated output current. PB 4 CE provides
true toroidal power conditioning for small and mid-power AV
systems, or dedicated to multiple video components and
audio components. Contact Torus Power for all other power
requirement capacities.
PowerBlock (
)
PB
models provide basic circuit protection
with a discrete, molded case surge suppressor.
2
Torus Power Inc. products are warranted to be free from manufacturing defects as follows:
• Five years from the original date of sale for toroidal transformers.
• Two years from the original date of sale for all other components.
The product warranty includes parts, labour and return shipping to the customer. Shipping to Torus Power Inc. for warranty repair
is the responsibility of the customer. Warranty coverage is not transferrable and original proof of purchase is required for warranty
claims. In the event of a warranty claim, Torus Power Inc. will remedy the issue by repair or replacement, as we deem necessary, to
restore the product to full performance. This warranty is considered void if the failure of the product or any component part is
caused by damage or misuse. Failure to fully comply with Torus Power operating instructions voids the warranty.
www.TorusPower.com
Owner’s Manual Power Conditioners Audio / Video Power Isolation Units PB 5-15R Series Manual
rev.2019/04/25
