Torqeedo Cruise 2.0 FP, Operating Manual

Page: 68 / 96

68
Deutsch
English
Please be aware that you need to establish communication between Cruise FP and
battery as described in chapter 5.3.1.1.
4.7 Connecting of Cruise FP to lead batteries (Gel, AGM), or
third-party lithium batteries
Cruise 2.0 FP operates with a power supply of between 20 V and 30 V (referring to nomi-
nal voltage). This means it may be operated with two 12 V batteries connected in series.
Cruise 4.0 FP operates with a power supply of between 42 V and 58 V (referring to nomi-
nal voltage). This means it may be operated with four 12 V batteries connected in series.
To increase capacity, several pairs of 12 V batteries may be connected in series and in
parallel.
1. Make sure that the main switch of cable set is in “OFF” position; otherwise switch it
into ”OFF” position.
2. Connect cable set according to the following drawings for Cruise 2.0 FP or 4.0 FP.
Pay attention to correct polarity of terminals and terminal posts (visible on imprint of
batteries and terminal posts).
When using the Cruise with batteries other than the the Power 26-104, make sure to con-
nect the data cable coming from the remote throttle directly to the electronics box.