Toro Z450 Z Master, Operator'S Manual

Page: 13 / 60

Product Overview
Figure 3
1. Rollbar 6. Side discharge
2. Fuel cap (both sides) 7. Front caster wheel
3. Seat belt 8. Controls
4. Motion control lever 9. Mower deck
5. Height-of-cut lever 10. Parking brake lever
Controls
Become familiar with all the controls before you
start the engine and operate the machine (Figure 3
and Figure 4).
Figure 4
1. Ignition switch 6. PTO Switch
2. Motion control lever 7. Height-of-cut lever
3. Parking brake lever 8. Fuel cap
4. Throttle control 9. Hourmeter
5. Choke
Using the Hour Meter
The hour meter (Figure 5) records the number
of hours the engine has operated. It operates
when the engine is running. Use these times for
scheduling regular maintenance.
Figure 5
1. Hour meter
Using the Fuel Shutoff Valve
The machine has 2 fuel tanks, one on the left side
and the other on the right side. Each tank connects
to a check valve and then to a tee. From there a
common fuel line leads to the engine (Figure 6).
Close the fuel shutoff valve before transporting
or storing the machine.
Figure 6
1. Fuel lter 3. Fuel shutoff valve
2. Hose clamp
13