Toro Z Master Commercial TURBO FORCE 3000 Series, Operator'S Manual

Page: 54 / 72

g009038
Figure 80
1. Clutch pulley 5. Square hole in the idler
arm for the ratchet
2. Mower belt 6. Idler-grease fitting
3. Spring-loaded idler pulley
7. Belt guide
4. Ratchet
10. Install the belt guide on the idler arm ( Figure 80 ).
11. Using the ratchet in the square hole, install the
idler spring (
Figure 80 ).
Note:
Make sure that the spring ends are
seated in the anchor grooves.
12. Install the belt covers ( Figure 81 ).
g027730
Figure 81
1. Position the belt cover 3. Ensure that the tab is
under the metal catch
2. Slide the belt cover under
the side catches
Replacing the Hydraulic
Pump-Drive Belt
1. Disengage the blade-control switch (PTO) and
engage the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Remove the mower belt; refer to Replacing the
Mower Belt (page 53) .
4. Raise the machine and support it with jack
stands (
Figure 82 ).
54