Toro Z Master 74902TE, Operator'S Manual

Page: 14 / 80

Choke Control
Use the choke to start a cold engine. Pull the choke
knob up to engage it. Push the choke knob down to
disengage it (
Figure 5 ).
Blade-Control Switch (Power
Takeoff)
The blade-control switch (PTO) engages and
disengages power to the mower blades (
Figure 5 ).
Ignition Switch
Use this switch to start the mower engine. It has 3
positions: S
TART
, R
UN
, and O
FF
.
Motion-Control Levers
Use the motion-control levers to drive the machine
forward, reverse, and turn either direction.
Neutral-Lock Position
Use the N
EUTRAL
-
LOCK
position with the
safety-interlock system to engage and to determine
the N
EUTRAL
position.
Fuel-Shutoff Valve
Close the fuel-shutoff valve (under the seat) when
transporting or storing the mower.
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine to
enhance and expand its capabilities. Contact your
Authorized Service Dealer or Distributor or go to
www.Toro.com for a list of all approved attachments
and accessories.
Specifications
Note:
Specifications and design are subject to
change without notice.
Width:
Cutting width 122 cm (48 inches)
Without Deck 116 cm (46 inches)
Deflector Up 137 cm (54 inches)
Deflector Down 162 cm (64 inches)
Length:
Roll Bar - Up 201 cm (79 inches)
Roll Bar - Down
206 cm (81 inches)
Height:
Roll Bar - Up Roll Bar - Down
179 cm (71 inches) 119 cm (47 inches)
Weight:
Model Weight
74902TE 556 kg (1226 lb)
14