CHASSIS
3-58
Toro Z Master G3 3000/5000/6000 Series Service Manual
3
Motion Control Assembly Installation
1. Install 4 new flange bushings in the LH motion
control (Fig. 204).
Fig. 204
DSCN-4487a
2. Install motion control lever in the LH motion control
(Fig. 205).
Fig. 205
DSCN-4488a
3. Install flat washer on motion control lever (Fig. 206).
Fig. 206
DSCN-4489a
4. Install the two spring washers with the crown side of
the washers facing out (Fig. 207).
Fig. 207
DSCN-4490
