CHASSIS
3-34
Toro Z Master G3 3000/5000/6000 Series Service Manual
3
Park Brake Cable Replacement (2012
& Later)
Left Park Brake Cable Removal (2012 &
Later)
1. Raise the rear end of the unit and install jack stands
under the tie down loop on the frame. Remove the
RH and LH wheels from the unit (Fig. 122).
Fig. 122
DSCN-4311a
4. Hold the threaded rod end with a tool, and with a
socket wrench remove the lock nut and washer from
the end of the cable (Fig. 124). Continue to remove
the washer and spring.
Fig. 124
DSCN-4315a
2. Disengage the park brake lever.
3. Remove the e-ring, washer, and brake pin from the
L-Bracket (Fig. 123).
Fig. 123
DSCN-4314a
5. Remove the e-ring from the groove in the cable end,
and the cable anchor located on the transmission
(Fig. 125).
Fig. 125
DSCN-4318a
