CHASSIS
3-32
Toro Z Master G3 3000/5000/6000 Series Service Manual
3
Adjusting the Parking Brake
2. Ensure the parking brake is disengaged.
Note: The left side brake is being adjusted in the
following steps; the right side adjustment is
performed the same way.
1. Open the push valve (vertical position) on the hydro
unit that you are replacing the brake cable on (Fig.
117).
Fig. 117
PICT-8677a
4. While holding the lever, use the other hand or fingers
to pull the cable threaded end tight through the
swivel. Spin the standard nut against the swivel (Fig.
119).
Fig. 119
PICT-8680a
3. Using hands and fingers only, push the caliper lever
arm forward to engage the brake pads on the wheel
hub until the lever stops (Fig. 118).
Fig. 118
PICT-8679a
A. Standard nut
B. Lock nut
A
B
