CHASSIS
3-16
Toro Z Master G3 3000/5000/6000 Series Service Manual
3
Throttle Control Assembly Installation
1. Slide the throttle cable through the hose clamp next
to the frame brace for the ROPS assembly (Fig.
058).
Fig. 057
DSCN-4260a
Fig. 058
DSCN-4260a
2. Slide the throttle cable through the hose clamp
located next to the engine (Fig. 059).
Fig. 059
DSCN-4259a
8. Continue sliding the cable through the second
hose clamp next to the frame brace for the ROPS
assembly and pull the throttle cable out of the unit
(Fig. 057).
