Seat Installation (continued)
g346224
Figure 38
6. Install the 2 (5/16 inch) torx screws securing the rear seat pan to the chassis.
g348057
Figure 39
7. Connect the battery by installing the positive cable first, then the negative
cable to the battery.
MYRIDE® Replacement
MYRIDE® Removal
1. Park the machine on a level surface and disengage the PTO. Stop the
engine, wait for all moving parts to stop and remove the key. Engage the
parking brake.
2. Disconnect the battery by removing the negative cable first, then the positive
cable from the battery.
3. Move the MYRIDE springs to the #5 position.
4. Remove the 4 (5/16 inch) lock nuts and carriage bolts securing the rear seat
pan to the MYRIDE platform.
5. With assistance, tip the seat forward and disconnect the seat switch.
Chassis: Service and Repairs
Page 5–20
4000 Series Z MASTER® Service Manual
3442-427 Rev A
Summary of Contents for Z Master 4000 Series
