220
200
100
120
G005241
Figure 7
1.
Voltage selector
3.
Switch
2.
Voltage-setting window
4.
Voltages by switch position
Note:
Always use the appropriate power cord for the power
outlet of the country or region where charging will occur.
Contact your Authorized Toro Dealer to obtain the correct
power cord if necessary.
4
Checking the Fluid Levels and
Tire Air Pressure
No Parts Required
Procedure
1.
Check the brake fluid level before the engine is first
operated; refer to
Checking the Brake Fluid Level (page
.
2.
Check the transaxle-fluid level before the engine is first
operated; refer to
Checking the Transaxle-Oil Level
(page 38)
.
3.
Check the air pressure in the tires; refer to
the Tire Air Pressure (page 21)
5
Reading the Manual and
Viewing the Safety Video
Parts needed for this procedure:
1
Operator's Manual
1
Parts Catalog
1
Safety training material
1
Registration card
1
Predelivery Inspection Form
1
Certificate of Quality
2
Key
Procedure
•
Read the
Operator's Manual
.
•
View the safety training material.
•
Fill out the registration card.
•
Complete the
Pre-delivery Inspection Form
.
15
