13.
Check the hydraulic-fluid level and replenish it,
if required.
Important:
Use only the hydraulic fluid specified.
Other fluids could damage the system.
Replacing the Hydraulic Filter
Service Interval:
After the first 10 hours—Replace
the hydraulic filter.
Every 800 hours—Replace the hydraulic filter.
Important:
Use of any other filter may void the
warranty on some components.
1.
Park the machine on a level surface.
2.
Engage the parking brake.
3.
Shut off the engine and remove the key.
4.
Clean the area around the filter-mounting area.
5.
Place a drain pan under the filter and remove
the filter (
).
g010332
Figure 73
1.
Hydraulic filter
2.
High-flow hydraulic filter
6.
Lubricate the gasket on the new filter.
7.
Ensure that the filter mounting area is clean.
8.
Screw the filter on until the gasket contacts the
mounting plate, and tighten the filter 1/2 turn.
9.
Start the engine and let it run for about 2 minutes
to purge air from the system.
10.
Shut off the engine and check the hydraulic-fluid
level and for leaks.
57
Summary of Contents for Workman HDX 07383
Page 64: ...Notes ...
Page 65: ...Notes ...
