1
All Rights Reserved
Printed in the USA
2003 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
TransPro Frame
Rail Ramp
Flat Ramp
TransPro 80
Model No. 04238—Serial No. 220000001 and Up
Model No. 04244
Model No. 04245
Form No. 3329–551
Installation Instructions
Mount Tongue Assembly
1. Insert tongue assembly into frame assembly while
aligning rear mounting holes (Fig. 1).
2. Secure tongue assembly into frame assembly with a
clevis pin, (2) washers and (2) cotter pins (Fig. 1).
1
1
2
Figure 1
1.
Tongue assembly
2.
Frame assembly
Mount Axle and Ramp (Model 04245) or
Rail (Model 04244) Assemblies
1. Refer to figure 2 to determine which mounting holes
should be used to fit the width of your greensmower.
1
3
2
Figure 2
1.
GR 1600 or GR 1000
w/Groomer
2.
GR 800
3.
GR 1000 & Flex 21
2. Mount axle assembly and a ramp assembly (Fig. 3) or
rail assembly (Fig. ) to each end of frame with (2)
3/8–16 x 3–1/2” lg. bolts, (4) washers and (2) nuts.
1
2
Figure 3
1.
Axle assembly
2.
Ramp assembly (R.H.)
