g298720
Figure 37
1.
Bolt
2.
Fan housing
5.
To prevent debris entering the air intake, install
the air filter to the filter base.
6.
Clean debris and grass from the parts.
7.
Remove the air filter and install the fan housing.
Torque the bolts to 8.8 N·m (78 in-lb).
8.
Install the air filter.
Fuel System
Maintenance
DANGER
In certain conditions, fuel is extremely
flammable and highly explosive. A fire or
explosion from fuel can burn you and others
and can damage property.
Refer to
Adding Fuel (page 14)
for a complete
list of fuel related precautions.
Replacing the In-Line Fuel
Filter
Service Interval:
Every 100 hours—Replace the
in-line fuel filter.
Never install a dirty filter after removing it from the
fuel line.
1.
Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
35
