Toro TimeCutter 5000C, Operator'S Manual

Page: 21 / 56

Disengaging the Blade-Control
Switch (PTO)
g009174
Figure 17
Operating the Throttle
You can move the throttle control between the F
AST
and S
LOW
positions ( Figure 18 ).
Always use the F
AST
position when engaging the PTO.
g187517
Figure 18
Operating the Choke
Use the choke to start a cold engine.
1. Pull up the choke knob to engage the choke
before using the key switch (
Figure 19 ).
Note:
Ensure that you fully engage the choke.
You may need to hold the knob up when you
use the key switch.
2. Push down the choke to disengage the choke
after the engine has started (
Figure 19 ).
g295540
Figure 19
1. O
N
position 2. O
FF
position
21