Toro Super Recycler 21382, Operator'S Manual

Page: 16 / 28

Removing the Grass Bag
1. Raise and hold up the rear deflector and lift the grass bag up by the handle off the notches of the handle
brackets (A of
Figure 18 ).
2. Install the rear plug (B of Figure 18 ).
Important:
Ensure that the rear plug is locked in place. To lock the plug, firmly push the plug in
until it snaps into place behind the tabs, and rotate the lever on the plug to the left (C of Figure 18 ).
Note:
To unlock the plug, rotate the lever on the plug to the right.
3. Lower the rear deflector.
g240401
Figure 18
Discharging the Clippings
Side-discharge or rear-discharge the clippings when cutting very tall grass.
WARNING
The blade is sharp; contacting the blade can result in serious personal injury.
Shut off the engine and wait for all moving parts to stop before leaving the operating position.
Side-Discharging the Clippings
If the bag is on the machine, remove it and insert the rear plug; refer to Removing the Grass Bag (page 16) .
Important:
Ensure that the rear plug is locked in place. To lock the plug, raise the rear deflector
( Figure 19 ), firmly push the plug in until it snaps into place behind the tabs, and rotate the lever on the
plug to the left ( Figure 19 ).
16