Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
Every 50 hours
• Grease the transport frame fittings.
• Lightly oil the wear and friction points.
Maintenance Safety
•
Before cleaning, servicing, or adjusting the
machine, do the following:
– Park the tow vehicle and machine on a level
surface.
– Shut off the tow vehicle engine, remove the
key, and wait for all moving parts to stop.
– Chock the wheels.
– Remove the machine from the tow vehicle.
•
Perform only those maintenance instructions
described in this manual. If major repairs are
ever needed or you need assistance, contact an
authorized Toro distributor.
•
Support the machine with blocks or jack stands
when working beneath it.
•
Ensure that all guards are installed securely after
maintaining or adjusting the machine.
•
Do not allow untrained personnel to service the
machine.
•
Keep all parts in good working condition and all
fasteners tightened. Replace all damaged or
missing decals.
•
Do not interfere with the intended function of a
safety device or reduce the protection provided
by a safety device. Check their proper operation
regularly.
•
Altering this machine in any manner may affect the
operation of the machine, performance, durability,
or its use may result in injury or death. Such use
could void the product warranty of The Toro®
Company.
Lubrication
Service Interval:
Every 50 hours
Every 50 hours
Grease Specification
Grease Type
Use
No. 2 lithium base grease
Hydraulic frame fittings
SAE 30 engine oil
Wear or friction points
Greasing the Hydraulic Frame
Fittings
There are 27 grease fittings on the transport frame.
Clean the grease fittings with a clean rag prior to
greasing to ensure that no foreign matter is forced
into the bushings with the lubricant. While applying
grease, ensure that the bushings are taking grease.
Apply lubricant to the fitting until some of the grease
comes out from the sides of the bushings.
g012770
Figure 24
20
