manualshive.com logo in svg

Toro Precision Soil Sensor, Manual

Share
Download
Toro Precision Soil Sensor Manual Download Page 1

Specifications

•  Power Supply: 4.5 VDC supplied by three size-AA alkaline batteries
•  Housing Material: High-impact, UV-resistant ABS 
•  Moisture Protection: Electronic circuitry encased in solid epoxy;  

battery compartment sealed by O-ring

•  Signal Quality Indicator: Tri-colored (Red, Yellow, Green) LED 
•  Stainless steel electrodes 
•  Built-in installation anchor stakes
•  RF reception range: 500’ (152 m) LOS (line of sight)
•  Operating Temperature: 14° F – 131° F (-10°C to +55°C)

Introduction

Congratulations on purchasing Toro’s new EVOLUTION

®

 

controller with the Precision™ Soil Sensor add-on. With the 

Precision™ Soil Sensor add-on, you will quickly realize savings 

in both time and money while keeping your garden healthy 

and beautiful.

EVOLUTION

®

 Series Add-On:

Precision

™

 Soil Sensor

EVOLUTION

®

 Series Add-On:

Precision

™

 Soil Sensor

LISTED

FCC-ID: OF753851    
IC: 3575A-53851

Summary of Contents for Precision Soil Sensor

















Reviews:

No comments

Brands by name

Popular brands

Load more brands