Toro Power Plex 51880, Operator'S Manual

Page: 21 / 24

SUPERCEDED
Problem Possible Cause Corrective Action
2 LED indicators are blinking on
the battery pack after you press the
battery-charge-indicator button on the
battery pack and the current charge
displays (when the battery pack is not in
use). 1. There is a difference in voltage
between cells in the battery pack.
1. Place the battery on the charger until
it is fully charged.
2 LED indicators are blinking on the
battery pack after releasing the trigger
(when the battery pack is in use).
1. There is a difference in voltage
between cells in the battery pack.
1. Place the battery on the charger until
it is fully charged.
1 LED indicator is blinking on the battery
pack. 1. The battery pack voltage is low. 1. Place the battery pack on the charger.
It is difficult to remove the battery pack
from the tool. 1. There is corrosion in the battery
terminals and/or the terminals on the
tool.
1. Apply dielectric grease to the battery
terminals; do not use any other type
of lubricant as it can damage the
terminals.
21