Toro Power Plex 51481, Operator'S Manual

Page: 8 / 16

3
Installing the Auxiliary Handle
Parts needed for this procedure:
1 Auxiliary handle
Procedure
1. Line up the groove along the handle with the groove
on the auxiliary handle and slide the auxiliary handle
toward the trimmer handle (A of
Figure 3 ).
2. Snap the handle securely into place (B of Figure 3 ).
g195362
Figure 3
4
Installing the Guard
Parts needed for this procedure:
1 Guard
2 Phillips head screw
Procedure
1. Remove the 2 Phillips screws that are taped to the
guard and slide the guard onto the trimmer base (A
of
Figure 4 ).
2. Secure the guard onto the base of the trimmer with the
2 Phillips screws (B of
Figure 4 ).
g203804
Figure 4
5
Installing the Edge Guard
Parts needed for this procedure:
1 Wire edge guard
Procedure
Slightly spread the ends of the wire edge guard apart and
insert the ends into the holes in the trimmer housing as
shown in
Figure 5 .
g203740
Figure 5
8