Maintenance Service
Interval
Maintenance Procedure
Every 400 hours
• Complete all yearly maintenance procedure specified in the engine operator's
manual.
• Inspect the fuel lines.
• Drain and clean the fuel tank.
• Change the suction filter.
• Change the pressure filter.
• Inspect the pump diaphragms and replace if necessary (see an Authorized Toro
Service Distributor).
• Inspect the pump check valves and replace if necessary (see an Authorized Toro
Service Distributor).
• Inspect the nylon pivot bushings.
Every 800 hours
• Change the transaxle/hydraulic fluid and clean strainer.
• Replace the hydraulic filter.
Yearly
• Calibrate the agitation-bypass valve.
Refer to your engine owner’s manual for additional maintenance procedures.
Daily Maintenance Checklist
Duplicate this page for routine use.
For the week of:
Maintenance Check Item
Mon.
Tues.
Wed.
Thurs.
Fri.
Sat.
Sun.
Check the brake and parking brake
operation.
Check the gear shift/neutral operation.
Check the fuel level.
Check the engine-oil level.
Check the transaxle oil level.
Inspect the air filter.
Inspect the engine cooling fins.
Check any unusual engine noises.
Check any unusual operating noises.
Check the tire pressure.
Check for fluid leaks.
Check the instrument operation.
Check the accelerator operation.
Clean the suction strainer.
Check toe-in.
Lubricate all grease fittings.
1
Touch up and damaged paint.
1
Immediately after
every
washing, regardless of the interval listed
38
Summary of Contents for Multi Pro 1750
Page 72: ...Schematics g028078 Sprayer System Schematic Rev DWG 125 0698 Rev B 72...
Page 73: ...Notes...
Page 74: ...Notes...
