Toro Lawn Striper Kit 20601, Operator'S Manual

Page: 1 / 16

Form No. 3368-
615
Rev A
Lawn Striper Kit
Model No. 20601
Operator Manual
Safety
• Read all of the instructions in this manual prior to
using the lawn striper attachment.
• The lawn striper attaches to and follows behind your
lawn mower during normal grass-cutting operations,
and should not affect the operating characteristics of
your mower. Carefully follow all of your lawn mower
manufacturer’s operating instructions and warnings
when using the lawn striper attachment.
• The lawn striper attachment should not
interfere with normal mower operations, such
as cutting/mulching/bagging. If there is any
interference
immediately shut off mower , then
inspect the lawn striper attachment installation, make
any adjustments needed to correct the problem, and
reassess operations to verify that the interference has
been resolved.
• The lawn striper attachment is designed to work with
most walk-behind, self-propelled, and push-type
lawn mowers.
Do not use with any other type of
mower.
• The lawn striper attachment must be properly
installed, attached, and adjusted in order to work
along with your particular lawn mower.
• If the lawn striper attachment should interfere
with your ability to mow around obstructions,
walkways, or other tightly constrained areas, shut off
the mower, remove the roller assembly, and then
mow around the obstructed area without the roller
assembly attached.
CAUTION
Do not assemble, disassemble, attach, inspect, or
adjust the lawn striper attachment while the mower
is running.
Shut off the mower before performing any of these
actions.
CAUTION
Do not place clamp system over any type of existing
wires/cables that may be present on lawn mower
handlebars.
© 2011—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN)
Printed in the USA.
All Rights Reserved