Form No. 3414-486 Rev B
HoverPro
®
500 Machine
Model No. 02604—Serial No. 400000000 and Up
Model No. 02606—Serial No. 400000000 and Up
Operator's Manual
Introduction
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely. Keep this
manual for future reference.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a
dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product.
g017365
1
g017365
Figure 1
1.
Model and serial number plate
Write the product model and serial numbers in the
space below:
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(
), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
g000502
Figure 2
1.
Safety-alert symbol
This manual uses 2 words to highlight information.
Important
calls attention to special mechanical
information and
Note
emphasizes general information
worthy of special attention.
For models with stated engine horsepower, the gross
horsepower of the engine was laboratory rated by the
engine manufacturer in accordance with SAE J1349.
As configured to meet safety, emission, and operating
requirements, the actual engine horsepower on this
class machine will be significantly lower.
Contents
Introduction ............................................................... 1
Safety ....................................................................... 2
General Safety ................................................... 2
Before Operation Safety ..................................... 2
During Operating Safety ..................................... 3
After Operating Safety ........................................ 4
Maintenance Safety............................................ 4
Safety and Instructional Decals .......................... 4
Setup ........................................................................ 6
1 Assembling the Handle .................................... 6
2 Installing the Footstop...................................... 6
3 Filling the Engine with Oil ................................. 7
Product Overview ..................................................... 8
Specifications .................................................... 9
Operation .................................................................. 9
Filling the Fuel Tank ............................................ 9
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the UK
All Rights Reserved
*3414-486* B
