Toro Groundsmaster 7210, Service Manual

Page: 28 / 342

150 LPM (40 GPM) Hydraulic Tester
Toro Part No. AT40002
Use this tester to test the hydraulic circuits
and components for flow and pressure
capacities. The tester flow measurement
maximum is 151 LPM (40 GPM). This
tester includes the following:
Load Valve – Turn the valve to restrict the
flow to create a simulated working load in
the circuit.
Pressure Gauge – A glycerine filled
pressure gauge 0 to 34,500 kPa (0 to
5,000 psi) to provide operating circuit
pressure.
Flow Meter – This meter measures the
actual fluid flow in the operating circuit
with a gauge rated at 20 to 150 LPM (4
to 40 GPM).
Note: This tester does not include
any hydraulic hoses or fittings; refer
to Hydraulic Hose Kit Toro Part No.
TOR6007 and Hydraulic Test Fitting Kit
Tor Part No. TOR4079.
Hydraulic O-Ring Kit
Toro Part No. 117-2727
This kit includes O-rings in a variety
of sizes for the face seal and port seal
hydraulic connections. To help prevent a
hydraulic leak, replace the O-rings when
you open the hydraulic connection.
Hydraulic Hose Kit
Toro Part No. TOR6007
This kit includes the fittings and hoses that
are used to connect high flow hydraulic
filter kit (TOR6011) to the machine
hydraulic traction system components.
Specifications and Maintenance: Special Tools Page 2–12 Groundsmaster 7210
16222SL Rev C