Testing the Diode Assembly (continued)
Diode Test Table
Multimeter Red Lead (+)
on Terminal
Multimeter Black Lead
(-) on Terminal
Continuity
Female
Male
Yes
Male
Female
No
Resistor Assembly
The resistor assembly is used in all the engine wire harnesses for GM7210
machines that is necessary for operating the key switch. The resistor plugs into
the wiring harness near the alternator; refer to the Engine Wire Harness Drawing
in Appendix A—Foldout Drawings
The resistor assembly can be identified by its gray color and resistor symbol on
the end of the resistor assembly body.
g034715
Figure 162
1.
End of the resistor body
2.
Resistor assembly
Testing the Resistor Assembly
The resistor can be tested using a digital multimeter (ohms setting).
Note:
The resistance across the resistor terminals should be 1600 ohms.
Electrical System: Testing the Electrical Components
Page 5–38
Groundsmaster 7210
16222SL Rev C
Summary of Contents for Groundsmaster 7210
