Oil Cooler
Removing the Oil Cooler
1. Park the machine on a level surface, lower the cutting deck (or implement),
shut off the engine, set the parking brake, and remove the key from the
key switch.
2. Unlatch the hood and raise it.
CAUTION
A hot radiator and oil cooler can cause burns.
Allow the engine and cooling systems to cool before working on or
near them.
3. Remove the radiator and oil cooler from the machine; refer to
.
4. Remove the 3 screws (item 1 in
), 6 flat washers, 3 lock washers,
and 3 nuts that attach the oil cooler to the radiator.
5. Separate the oil cooler from the radiator.
Inspecting the Oil Cooler
1. Back flush the oil cooler with cleaning solvent. After cleaning the cooler,
ensure that all the solvent is drained from the cooler.
CAUTION
Use eye protection such as goggles when using compressed air to
dry the oil cooler.
Hydraulic System: Service and Repairs
Page 4–134
Groundsmaster 7210
16222SL Rev C
Summary of Contents for Groundsmaster 7210
