Form No. 3412-991 Rev A
Traction Pedal Improvement Kit
Groundsmaster
®
360 Multi-Purpose Machine with Serial Number
315000001 through 316999999
Model No. 136-4450
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
Thrust washer
1
Sleeve spacer (long)
1
Sleeve spacer (small)
1
1
Bearings
2
Install the traction rod.
Traction rod
1
Jam nut (3/8 inch)
1
Rod-end bearing
1
Linkage plate
1
Rubber mount
2
2
Plastic mount
2
Install the traction rod.
3
No parts required
–
Adjust the traction rod.
4
No parts required
–
Adjust the traction drive for neutral.
Note:
Install this kit for improving the movement of the machine out of neutral position.
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California to
cause cancer, birth defects, or reproductive harm.
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3412-991* A
