Form No. 3378-983 Rev A
Oil Drain Kit
GreensPro
™
1200 Greens Roller
Model No. 111-7118
Installation Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California to
cause cancer, birth defects, or reproductive harm.
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Qty.
Use
Oil-drain adapter
1
Oil-drain valve
1
Oil-drain hose
1
Install the oil drain kit.
Installing the Oil Drain Kit
1.
Raise the machine onto the transport wheels.
2.
Tilt the machine so that the end of the machine with
the engine is closer to the ground, and support the
other end to hold it in this position.
3.
Place a suitable container under the oil-drain plug.
4.
Remove the oil-drain plug, and allow the oil to drain
Figure 1.
1
G025535
Figure 1
1.
Oil-drain plug
5.
Install the oil-drain adapter into the oil-drain hole
(Figure 2).
2
3
1
G025536
Figure 2
1.
Oil-drain hose
3.
Oil-drain adapter
2.
Oil-drain valve
6.
Install the oil-drain valve into the oil-drain adapter
(Figure 2).
7.
Ensure that the oil-drain valve is closed.
Note:
To close the oil-drain valve, push it in and turn
it clockwise (Figure 3).
© 2014—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the UK
All Rights Reserved
*3378-983* A
