specifically designed for fuel storage or it should be
disposed of carefully.
•
Start the engine carefully according to the
Operator’s
Manual
and with feet away from the cutting elements.
•
Always wear ear protection.
•
Do not tilt the machne when starting the engine, except if
the trimmer has to be tilted for starting. In this case do
not tilt it more than absolutely necessary and lift only the
part which is away from the operator.
•
Examine the machine regularly and replace worn or
damaged parts for safety. Never replace the cutting unit
with metal parts and only use cutting heads and cutting
elements which are suitable for use at the operating speed
of the trimmer;
Sound Pressure
This machine has a sound pressure level at the operator’s ear
of 88 dBA, which includes an Uncertainty Value (K) of 2
dBA. The sound pressure level was determined according to
the procedures outlined in EN ISO 11201.
Sound Power
This machine has a guaranteed sound power level of 98 dBA,
which includes an Uncertainty Value (K) of 2 dBA. The sound
power level was determined according to the procedures
outlined in EN ISO 3744.
Vibration
Measured vibration level for the left hand = 3.4 m/s
2
.
Measured vibration level for the right hand = 4.4 m/s
2
.
Uncertainty Value (K) = 2 m/s
2
.
The measured values were determined according to the
procedures outlined in EN ISO 20643.
4
Summary of Contents for Greensmaster 2600
Page 17: ...Notes 17...
Page 18: ...Notes 18...
