– stop on level ground;
– disengage the cutting unit and traction drive;
– set the parking brake;
– stop the engine.
•
Disengage drive to cutting unit when transporting or
not in use.
•
Stop the engine and disengage drive to attachment:
– before refuelling;
– before removing the grass catcher;
– before making height adjustment.
– before clearing blockages;
– before checking, cleaning or working on the
mower;
– after striking a foreign object or if an abnormal
vibration occurs. Inspect the mower for damage
and make repairs before restarting and operating
the equipment.
•
Reduce the throttle setting before stopping engine
and turn the fuel shut off valve off at the conclusion
of mowing.
•
Keep hands and feet away from the cutting unit.
•
Slow down and use caution when making turns
and crossing roads and sidewalks. Stop reel if not
mowing.
•
Do not operate the mower under the influence of
alcohol or drugs
•
Lightning can cause severe injury or death. If
lightning is seen or thunder is heard in the area, do
not operate the machine; seek shelter.
•
Use care when loading or unloading the machine
into a trailer or truck
•
Use care when approaching blind corners, shrubs,
trees, or other objects that may obscure vision.
Maintenance and Storage
•
Keep all nuts, bolts and screws tight to be sure the
equipment is in safe working condition.
•
Never store the equipment with fuel in the tank
inside a building where fumes may reach an open
flame or spark.
•
Allow the engine to cool before storing in any
enclosure.
•
To reduce the fire hazard, keep the engine and fuel
storage area free of grass, leaves, or excessive grease.
•
Check the grass catcher frequently for wear or
deterioration.
•
Keep all parts in good working condition and all
hardware and hydraulic fittings tightened. Replace all
worn or damaged parts and decals.
•
If the fuel tank has to be drained, do this outdoors.
•
Be careful during adjustment of the machine to
prevent entrapment of the fingers between moving
blades and fixed parts of the machine.
•
Disengage drives, disengage the cutting unit, set
parking brake, stop engine and disconnect spark plug
wire. Wait for all movement to stop before adjusting,
cleaning or repairing.
•
Clean grass and debris from cutting unit, drives,
mufflers, and engine to help prevent fires. Clean up
oil or fuel spillage.
•
Carefully release pressure from components with
stored energy.
•
Remove the spark plug wire before making any
repairs.
•
Use care when checking the reel. Wear gloves and
use caution when servicing them.
•
Keep hands and feet away from moving parts. If
possible, do not make adjustments with the engine
running.
Toro Mower Safety
The following list contains safety information specific
to Toro products or other safety information that you
must know that is not included in the CEN, ISO, or
ANSI standard.
This product is capable of amputating hands and
feet and throwing objects. Always follow all safety
instructions to avoid serious injury or death.
Use of this product for purposes other than its intended
use could prove dangerous to user and bystanders.
•
Know how to stop the engine quickly.
•
Do not operate the machine while wearing tennis
shoes or sneakers.
•
Wearing safety shoes and long pants is advisable and
required by some local ordinances and insurance
regulations.
•
Handle gasoline carefully. Wipe up any spills.
•
Check the safety interlock switches daily for proper
operation. If a switch should fail, replace the switch
before operating the machine.
•
Using the machine demands attention. To prevent
loss of control:
5
Summary of Contents for GREENSMASTER 1000
Page 34: ...Notes 34...
Page 35: ...Notes 35...
