Form No. 3421-620 Rev A
Groomer Drive System
Fixed Head Greensmaster
®
Walk Behind Series Mowers
Model No. 04134
Installation Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California
to cause cancer, birth defects, or reproductive harm.
Important:
Read these instructions thoroughly before setting up or operating the groomer. Failure
to follow the set up or operating instructions in this manual may result in damage to the machine,
groomer, and the turf.
Note:
Determine the left and right sides of the machine from the normal operating position.
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the machine.
2
No parts required
–
Move the front roller.
Groomer-housing assembly
1
Flat-head screw (3/8 x 2 inches)
2
Locknut (3/8 inch)
2
Bearing adapter
1
Spacer
2
O-ring
1
Synthetic grease
-
Slot cover
1
3
Adapter ring
1
Install the groomer housing.
Shaft assembly
1
Drive gear
1
4
Synthetic grease
–
Install the drive gear.
5
Forward Rotation Kit (obtain separately)
1
Set the groomer for forward rotation
(optional).
Groomer-housing cover assembly
1
Gasket
1
Flange-head bolt (1/4 x 3/4 inch)
5
6
Synthetic grease (3.0 oz)
1
Install the groomer-housing cover.
© 2018—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3421-620* A