The Toro Company – 1998
Printed in USA
All Rights Reserved
FORM NO. 3322-276
INSTALLATION
INSTRUCTIONS
Part No. 99–8515
PTO Engagement Kit
Loose Parts
Note:
Use the chart below to identify parts for assembly.
DESCRIPTION
QTY.
USE
Flat washer
Hex Head Screw
Hex Lock Nut
Spacer
Spring
2
1
1
1
1
Install engagement kit
Installing engagement kit
1.
Disengage the power take off (PTO), set the
parking brake, and turn the ignition key to
“OFF” to stop the engine. Remove the key.
2.
Remove existing hardware from blade
engagement lever. Discard old hardware.
Note:
You may have to loosen gas tank. Do
not remove gas tank.
3.
Install new hardware and using existing lever.
(Fig. 1).
Note:
Do not over tighten hardware. The
lever must engage and disengage
smoothly (Fig. 1).
4.
Retighten gas tank if needed.
1
2
3
4
2
5
6
Figure 1
1.
Hex Head Screw
2.
Flat Washer (2)
3.
Spacer
4.
Spring
5.
Nut
6.
Engagement Lever
