Toro 78463, Operator'S Manual

Page: 18 / 36

11
Installing the Baffle
Parts needed for this procedure:
1 Baffle
1 Carriage bolt (5/16 x 7/8 inch)
1 Flange nut (5/16 inch)
2
Carriage bolt (3/8 x 7/8 inch)
2 Flange nut (3/8 inch)
Procedure
1. Remove the 2 existing flange nuts (3/8 inch) and
2 carriage bolts (3/8 x 7/8 inch) from the mower
deck (
Figure 23 ).
Note:
Retain the hardware that you removed
during this procedure so that it is available for
changeover.
g038113
Figure 23
1. Flange nut (3/8 inch) 2. Carriage bolt (3/8 x 7/8
inch)
2. Install the baffle using the carriage bolt (5/16 x
7/8 inch), flange nut (5/16 inch), 2 carriage bolts
(3/8 x 7/8 inch), and 2 flange nuts (3/8 inch) as
shown in
Figure 24 .
g341587
Figure 24
1. Flange nut (3/8 inch) 4. Flange nut (5/16 inch)
2. Carriage bolt (3/8 x 7/8
inch) 5. Carriage bolt (5/16 x 7/8
inch)
3. Baffle
18