10
Installing the Blower-Pulley
Assembly and Belt-Cover
Bracket
Parts needed for this procedure:
1
Blower pulley
1
Pulley mount
3
Locknut (3/8 inch)
1
Belt-cover bracket
1
Speed nut
2
Carriage bolt (1/4 x 3/4 inch)
2
Locknut (1/4 inch)
Procedure
1.
Use a 3/8-inch ratchet in the square hole in the
idler arm to remove tension on the idler spring
(
).
g334846
Figure 18
1.
Spring
4.
Spring-loaded idler
assembly
2.
Clutch pulley
5.
Ratchet
3.
Mower belt
6.
Square hole in the idler
arm for the ratchet
2.
Remove the belt from the right mower-deck
pulley.
15
