Toro 51831, Manual

Page: 10 / 64

1
Unfolding the Handle
Parts needed for this procedure:
1 Allen wrench
Procedure
1. Unfold the handle (A of Figure 3 ).
2. Align the locking button on the lower shaft with the slotted hole on the upper shaft and slide the 2 shafts
together (B and C of
Figure 3 ).
Note:
The locking button clicks into the slotted hole when the shafts are secured (D of Figure 3 ).
3. Using the provided Allen wrench, tighten the screw on the shaft connector until it is secure (E of Figure 3 ).
g330189
Figure 3
8