Advancing the Line
The trimmer is equipped with an auto-feed head.
The line will
advance 6 mm (1/4 inch) each time you stop and start the
trimmer.
When the line reaches the blade in the deflector, it will
be cut off at that length.
1.
With the trimmer running, release the switch trigger.
2.
Wait 2 seconds, then press the switch trigger.
3.
Resume trimming.
Advancing the Line Manually
Disconnect from the power supply, then push the button at the
base of the spool retainer while pulling on the trimmer line to
manually advance the line.
Figure 13
1.
Button
Trimming
G016254
Figure 14
Edging
To use the trimmer as edger, press the rotator button and rotate
the head as shown in
Figure 15
.
1
2
G015660
Figure 15
1.
Rotator button
2.
Edger guide
Using the Power Saver Feature
Engaging the power saver feature will extend the run time of the
battery by shortening the length of the trimmer line and decreasing
the load on the motor.
If you are experiencing reduced battery runtime, it is recommended
that you engage the power saver feature.
9
Summary of Contents for 51487A
Page 3: ...131 0357 131 0376 131 0370 131 0372 131 0369 131 0371 3...
Page 13: ...Notes 13...
Page 14: ...Notes 14...
Page 15: ...Notes 15...
