Form No. 3380-722 Rev A
Wireless Hour Meter Kit
GreensPro
™
1240 Greens Roller
Model No. 44922
Installation Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California to
cause cancer, birth defects, or reproductive harm.
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Qty.
Use
Wiring harness
1
Install the wiring harness.
Hour meter
1
Regulator
1
Screw (M6 x 20 mm)
2
Locknut (M6)
2
Washer (M6 x 12 mm)
4
Cable tie
4
Install the regulator and the hour meter.
Installing the Wiring Harness
1.
Ensure that the machine is off and the engine is cool.
2.
Disconnect the existing hour-meter wiring harness
from the lighting-coil wires and the existing hour meter
(Figure 1).
1
G025121
2
Figure 1
1.
Existing hour-meter wiring
harness
2.
Lighting-coil wires
© 2014—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the UK
All Rights Reserved
*3380-722* A
