Form No. 3375-919 Rev A
Armrest Kit
GreensPro™ 1200 Greens Roller
Model No. 44908
Installation Instructions
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Qty.
Use
Left armrest bracket
1
Right armrest bracket
1
Armrest pad
2
Bolt (M10 x 45mm)
2
Locknut
2
Spacer
4
Assemble the armrest.
Bolt (M6 x 25mm)
6
Clip nut
6
Install the armrest.
Assembling the Armrest
1.
Align a spacer on each side of the right armrest bracket
(Figure 1).
2.
Align the spacers and the right armrest bracket with the
holes in the armrest pad (Figure 1).
3.
Align a bolt (M10 x 45mm) with the holes in the armrest
pad, spacers, and the armrest bracket (Figure 1).
4.
Thread a nut onto the bolt (M10 x 45mm) (Figure 1).
5.
Tighten the nut onto the bolt until the nut and bolt
head are flush with the armrest pad.
Note:
Do not over tighten the nut and bolt.
6.
Repeat steps 1 through 5 to assemble the left armrest.
G019824
1
1
6
4
3
8
9
7
10
1
2
5
9
Figure 1
1.
Armrest pad
6.
Clip nut
2.
Right armrest bracket
7.
Nut
3.
Left armrest bracket
8.
Bolt (M10 x 45mm)
4.
Bolt (M6 x 25mm)
9.
Spacer
5.
Seat pan flange
10.
Armrest bracket (left
shown)
© 2012—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved
*3375-919* A
