11
Loose Parts
Note: Use the chart below to verify that all parts have been shipped.
Description
Qty.
Use
90 degree fitting
Quick coupler
Hose adapter
Fill receptacle bracket
Flange nut, 5/16 inch
Hairpin cotters
1
1
1
1
1
2
Install the anti-siphon fill receptacle.
Spray Pro Monitor
Bracket
Flange-head bolt, 3/4 inch
Flange nut, 1/4 inch
Knob
Washer
Carriage bolt
1
1
2
2
2
2
2
Install the Spray Pro monitor.
Key
2
Use in the ignition switch.
Operator’s Manual
Engine Operator’s Manual
1
1
Read before operating the machine.
Operator Video
1
Watch before operating the machine.
Parts Catalog
1
Use for ordering replacement parts.
Registration Card
1
Complete and return to Toro.
Predelivery Inspection Form
1
Complete and file in your customer history portfolio.
Installing the Anti-siphon Fill
Receptacle
1. Remove the rubber cap from the stud on the tank strap
(Fig. 2).
1865
1
6
5
4
2
3
Figure 2
1.
Fill receptacle bracket
2.
Stud
3.
Flange nut, 5/16 inch
4.
90 degree elbow fitting
5.
Quick coupler
6.
Hose adapter
2. Place the fill receptacle bracket over the stud and secure
it with a flange nut (5/16 inch) (Fig. 2).
3. Place the threaded end of the 90 degree elbow fitting
through the bracket and thread the quick coupler onto it,
securing it to the bracket (Fig. 2).
Note: Install the fitting with the open end pointing toward
the tank opening so the water will arc into the tank when
you fill it.
4. Install the hose adapter into the quick coupler (Fig. 2).
5. Lock the adapter into place by swinging the levers
toward the adapter and then secure them with the
hairpin cotters.