Form No. 3436-316 Rev A
36in Recycler
®
Kit
Proline Commercial Walk-Behind Mower with 36in Floating Cutting
Unit
Model No. 140-1913
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
Trailing shield
1
R-clamps
2
Bolt (5/16 x 3/4 inch)
2
3
Nut (5/16 inch)
Install the trailing shield.
Left baffle
1
Right baffle
1
Discharge plate
1
Bolt (3/8 x 1 inch)
9
4
Nut (3/8 inch)
9
Install the kit.
5
Mulching blade
3
Install the mulching blades.
1
Preparing the Machine
No Parts Required
Procedure
1.
Park the machine on a level surface.
2.
Disengage the PTO, engage the parking brake.
3.
Shut off the engine and remove the key.
4.
For easier access, raise the front of the machine
and support it using jack stands rated for your
machines.
WARNING
Mechanical or hydraulic jacks may fail to
support the machine and cause serious
injury.
Use jack stands when supporting the
machine.
2
Preparing the Mower Deck
No Parts Required
Procedure
1.
Remove the existing mower blades; refer to the
Operator’s Manual
for the machine.
2.
Remove the 2 bolts and 2 nuts securing the
baffle to the deck and remove the baffle (
Note:
Retain the baffle for converting back to
side discharge.
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved
*3436-316* A